FAG | HCB7205ETP4S | Bearings | bearings Svalbard and Jan Mayen Islands

FAG HCB7205ETP4S anti-corrosion, large radial load, the main size 25x52x15 mm Angular Contact Ball Bearings in stock!

The flow line of the FAG HCB7205ETP4S bearing lubricant is at the edge of the inner ring of the Angular Contact Ball Bearings. It is difficult to obtain the lubricating oil at the contact point with the large end face of the roller, and the lubricating part of this part needs more lubricating oil. Therefore, the FAG HCB7205ETP4S bearing rib is on the outer ring, so that the FAG HCB7205ETP4S bearing can lubricate the outer ring edge and the roller surface contact part, and at the same time can store lubricating oil even when it is at rest, avoiding the burn accident of the FAG HCB7205ETP4S Angular Contact Ball Bearings when starting. In order to avoid the oil discharge channel, the power loss and temperature rise of the oil agitation will be too high. The FAG HCB7205ETP4S bearing inner diameter and outer diameter thickness is 25x52x15 mm, which is twice the performance of the ordinary structure. Since the inner ring has no ribs, the FAG HCB7205ETP4S has a reduced temperature, which reduces the possibility of creep between the inner ring and the shaft. The FAG HCB7205ETP4S bearing adopts the outer ring guiding mode so that the cage can guide the roller to run smoothly without skewing, avoiding vibration and excessive wear, which is also beneficial to the high speed operation of the FAG HCB7205ETP4S bearing.